Have five types for carbon steel
Manual electrodes: depands on Mpa value
Flux cored wire:CO2 protech, Ar+CO2 Mix protect, Self-protect,vertical weld,and Delete SR.
Solid wire: Gas protect and GTAW
SAW wire:Solid style
Metal Cored wire: Gas protect and SAW
Carbon steels
-
550Mpa Hand Electrode For High Strength Steel
Application&Standard 1. Suitable for welding of medium carbon steel and low alloy steel, as well as the corresponding strength of pressure vessel, petrochemical, spherical tank, ocean engineering, pipeline, ship, bridge and other structures, such as Q420, Q460, 15MnTi, 15MnV, X60, X70 welding. 2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E8015-G & A5.5M E5515-G, ISO2560-A, ISO 2560-B: E5515-G AP Low alloy high strength steel electrode with low sodium hydrogen coating. U... -
490Mpa Hand Electrode For High Strength Steel
Application&Standard&Note 1. Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE CORRESPONDING STRENGTH OF BOILER, pipeline, vehicle, BUILDING, BRIDGE AND other STRUCTURES, SUCH AS Q345. 2. The standard we met: GB/T5117 E5018, AWS A5.1 E7018 & A5.1M E4918, ISO2560-A:E 42 3 B 3 2, ISO 2560-B: E4918 A Since the E7018 electrode easily absorbs moisture, it is kept in the electrode drying oven. The electrode stored in the air can be rebaked at 350 ~ 400℃ for... -
490Mpa Hand Electrode For High Strength Steel
Application&Standard 1.Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE corresponding strength of boiler, pipeline, pressure vessel, ocean engineering structure welding, such as Q345, X60 pipeline steel, etc. 2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E7015-G & A5.5M E4915-G, ISO2560-A:E 42 4 Z0.5 Ni B 2 2, ISO 2560-B: E4915 G-AP Points for attention: 1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed. 2. Befo... -
High Carbon steels Flux cored wire welding accessories
Application & Standard 1. Suitable for welding of carbon steel and corresponding strength of boiler, pipeline, vehicle, building, bridge and other structures, such as Q235. 2. The standard we met: GB/T5117 E4315, AWS, ISO2560-A:E 35 3 B 2 2, ISO 2560-B: E4315A The carbon content of high carbon steel is relatively high, the weldability is relatively poor, welding to preheat, after welding to slow cooling or 350 degrees of low temperature tempering treatment, the specific length of he... -
High Carbon steels E7016 Manual electrode welding accessories
Application&Standard&Note： 1. Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE CORRESPONDING STRENGTH OF BOILER, pipeline, vehicle, BUILDING, BRIDGE AND other STRUCTURES, SUCH AS Q345. 2. The standard we met: GB/T5117 E5016, AWS A5.1 E7016 & A5.1M E4916, ISO2560-A:E 42 3 B 1 2, ISO 2560-B: E4916 A Welding precautions: Before welding, the weldment must be entirely free of oil, rust, moisture, etc.; drying at 350°C for an hour; and... -
490Mpa Hand Electrode For High Strength Steel
Application&Standard&Note： 1. Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE CORRESPONDING STRENGTH OF BOILER, pipeline, vehicle, BUILDING, BRIDGE AND other STRUCTURES, SUCH AS Q345. 2. The standard we met: GB/T5117 E501, AWS A5.1 E701 & A5.1M E491, ISO2560-A:E 42 3 B 2 2, ISO 2560-B: E4915 A Points for attention: 1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed. 2. Before welding, the weldm... -
430Mpa Hand Electrode For Low Carbon Steel
Application&Standard&Note： 1. Welding ordinary strength of low carbon steel structure and low strength grade of low alloy steel. 2. The standard we met: GB/T5117 E4303, AWS, ISO2560-A:E 35 0 R 1 2, ISO 2560-B: E4303A, JIS Z3211 E4303 1. The insulator must be cooked, and the electrode must be baked at 180°C. When it is being welded in the workshop, it needs to be placed within the insulation cylinder. 2. Pay care when welding: To make sure the welding region...
