Hard-facing Manual electrode EDPCrMo-A5-15 Soldering makings
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | P | S |
| GB/T RULES | 0.50-0.80 | 0.50-1.50 | 1.00 | 4.00-8.00 | 0.035 | 0.035 |
| AWS RULES | - | - | - | - | - | - |
| EXAMPLE VALUE | 0.64 | 1.35 | 0.94 | 7 | 0.027 | 0.007 |
WELD PASS HARDNESS:
Example value HRC=55
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 3.2*350 | 4.0*350 | 5.0*350 | ||||||||
| ELECTRICITY(Amp) | 80-120 | 120-170 | 160-210 | ||||||||
Low sodium hydrogen surfacing electrode.
High hardness, no heat treatment.
Can not continue cutting, good wear resistance.
10000TEU container ship
180,000 tons Capesize bulk carrier
210,000 tons Newcastle type bulk carrier
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | P | S |
| GB/T RULES | 0.50-0.80 | 0.50-1.50 | 1.00 | 4.00-8.00 | 0.035 | 0.035 |
| AWS RULES | - | - | - | - | - | - |
| EXAMPLE VALUE | 0.64 | 1.35 | 0.94 | 7 | 0.027 | 0.007 |
WELD PASS HARDNESS:
Example value HRC=55
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 3.2*350 | 4.0*350 | 5.0*350 | ||||||||
| ELECTRICITY(Amp) | 80-120 | 120-170 | 160-210 | ||||||||
-
Hard-facing Manual electrode weld fabrication ...
-
Hard-facing Flux cored wire weld fabrication s...
-
Hard-facing Flux cored wire weld fabrication a...
-
Hard-facing D507Mo Manual electrode welding ac...
-
Hard-facing Manual electrode weld fabrication ...
-
Cobalt alloys Manual electrode ECoCr-A Welding ...
Write your message here and send it to us